background image

3

VQT4Q16

The unit may keep the user settings information in the unit. If you 
discard this unit either by disposal or transfer, then follow the 
procedure to return all the settings to the factory presets to delete 
the user settings. (

>

46, "To return all settings to the factory 

preset.")

The operation history may be recorded in the memory of this unit.

Information for Users on Collection and 
Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/
or accompanying documents mean that used 
electrical and electronic products and batteries 
should not be mixed with general household 
waste.
For proper treatment, recovery and recycling of 
old products and used batteries, please take them 
to applicable collection points, in accordance with 
your national legislation and the Directives 2002/
96/EC and 2006/66/EC.
By disposing of these products and batteries 
correctly, you will help to save valuable resources 
and prevent any potential negative effects on 
human health and the environment which could 
otherwise arise from inappropriate waste 
handling.
For more information about collection and 
recycling of old products and batteries, please 
contact your local municipality, your waste 
disposal service or the point of sale where you 
purchased the items.
Penalties may be applicable for incorrect disposal 
of this waste, in accordance with national 
legislation.

For business users in the European Union

If you wish to discard electrical and electronic 
equipment, please contact your dealer or supplier 
for further information.

[Information on Disposal in other Countries 
outside the European Union]

These symbols are only valid in the European 
Union. If you wish to discard these items, please 
contact your local authorities or dealer and ask for 
the correct method of disposal.

Note for the battery symbol (bottom two 
symbol examples):

This symbol might be used in combination with a 
chemical symbol. In this case it complies with the 
requirement set by the Directive for the chemical 
involved.

This unit adopts the following technology for copyright protection.

Cinavia Notice 
This product uses Cinavia technology to limit the use of unauthorized 
copies of some commercially-produced film and videos and their 
soundtracks. When a prohibited use of an unauthorized copy is 
detected, a message will be displayed and playback or copying will be 
interrupted.
More information about Cinavia technology is provided at the Cinavia 
Online Consumer Information Center at http://www.cinavia.com. To 
request additional information about Cinavia by mail, send a postcard 
with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San Diego, 
CA, 92138, USA.

Caution for AC Mains 

Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for 
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the 
replacement fuse has a rating of 5-ampere and that it is approved 
by ASTA or BSI to BS1362.
Check for the ASTA mark 

Ï

 or the BSI mark 

Ì

 on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it 
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a 
replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains 
plug (figures A and B). Confirm the AC mains plug fitted and follow 
the instructions below.
Illustrations may differ from actual AC mains plug.
1

Open the fuse cover with a screwdriver.

2

Replace the fuse and close or attach the fuse cover.

To dispose or transfer this unit

Cd

Restriction on use of 

unauthorized copied content

Fuse cover

Figure A

Figure B

Figure A

Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

SC-BTT560&500&460&400EBEP-VQT4Q16_mst.book  3 ページ  2012年12月3日 月曜日 午前10時25分

Summary of Contents for SC-BTT560

























































Reviews: