42
VQT3Z99
Speaker installation option
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.
You can attach all of the speakers (except
subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to
be attached should be capable of supporting
10 k
g
per screw.
1
Drive a screw (not supplied) into the wall.
A
At least 30 mm
B
‰
4.0 mm
C
‰
7.0 mm to
‰
9.4 mm
D
Wall or pillar
E
5.5 mm to 7.5 mm
2
Fit the speaker securely onto the screw(s)
with the hole(s).
Use the measurements indicated below to identify
the screwing positions on the wall.
≥
Leave at least 20 mm of space above the
speaker and 10 mm on each side to allow
enough space for fitting the speaker.
[BTT282]
Front speaker
Attach to a wall without the stand. (
>
13)
A
37 mm
B
45 mm
[BTT182]
Front speaker
C
40 mm
D
24 mm
Preventing from falling
[BTT282]
Front speaker
Preventing from dropping
Front speaker
1
Thread a string to the speaker.
≥
Use a string of less than
‰
2.0 mm, which is
capable of supporting over 10 k
g
.
e.g.,
[BTT282]
Front speaker
A
String (not supplied)
B
Rear of the speaker
2
Thread a string from the wall to the
speaker and tie tightly.
C
Screw eye (not supplied)
D
Wall
E
Approx.150 mm
F
Less than 100 mm
Attaching to a wall
e.g.,
[BTT282]
Front speaker
DO NOT
DO
≥
In this position, the
speaker will likely fall if
moved to the left or right.
≥
Move the speaker so
that the screw is in this
position.
Preventing the speakers from
falling or dropping
When mounted on a wall
When placed on the floor
SC-BTT282&182EB-VQTVQT3Z99_mst.book 42 ページ ２０１２年２月８日 水曜日 午前１１時８分
