![background image](http://html1.mh-extra.com/html/panasonic/sc-all9/sc-all9_operating-instructions-manual_3883701016.webp)
16
SQT1211
You can change the transmission mode to
prioritise transmission quality or sound quality.
Preparation
≥
Touch [
].
≥
If a Bluetooth
®
device is already connected,
disconnect it.
Touch and hold [
] and [2] for at least
4 seconds.
The mode indicator blinks once.
Mode1 (Emphasis on connectivity)
The mode indicator blinks twice.
Mode2 (Emphasis on sound quality)
≥
You can not set this function during the network indicator
blinking in blue and red.
≥
Select “Mode1” if the sound is interrupted.
≥
The factory default is “Mode2”.
If the sound input level from the Bluetooth
®
device is too low, change the input level setting.
Preparation
≥
Make sure that a Bluetooth
®
device is already
connected with this unit. (
l
15)
Touch and hold [
] and [VOL –] for at
least 4 seconds.
≥
The mode indicator (amber) blinks to show the
Bluetooth
®
input level.
≥
You can not set this function during the network indicator
blinking in blue and red.
≥
Select “Low” if the sound is distorted.
≥
The factory default is “Low”.
AUX input
You can also listen to music from an external
music player through this unit.
Preparation
≥
Connect an external device. (
l
6)
1 Touch [AUX].
≥
The AUX indicator lights up.
2 Start playback on the connected
device.
∫
To select the sound input level of the
external device
While in AUX mode, touch and hold [AUX]
for at least 4 seconds.
The mode indicator blinks once.
Normal level
The mode indicator blinks twice.
High level
≥
The factory default is “Normal level”.
≥
You can not set this function during the network indicator
blinking in blue and red.
≥
To improve sound distortion when “High level” is
selected, select “Normal level”.
≥
Turn the volume of the external device down to reduce
the input signal. High level of input signal will distort the
sound.
≥
For details, refer to the operating instructions of the
device.
≥
When the unit is selected as the speakers powered by
AllPlay, the audio source will change to the network.
≥
AUX cannot be selected as the audio source when the
unit is waiting for the WPS PUSH or WPS PIN code
connection.
Bluetooth
®
transmission
mode
Bluetooth
®
input level
Number of blinks
Bluetooth
®
input
level
1
2
3
Low
High
SC-ALL9&6-SQT1211_mst.book 16 ページ 2016年1月12日 火曜日 午後3時16分