background image

3

R

Q

T9975

Caution for AC mains lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin 
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that 
the replacement fuse has a rating of 5-ampere and that it 
is approved by ASTA or BSI to BS1362.

Check for the ASTA mark 

 or the BSI mark   on the 

body of the fuse.

If the plug contains a removable fuse cover you must 
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until 
a replacement cover is obtained.
A replacement fuse cover can be purchased from your 
local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC 
mains plug (figures A and B). Confirm the AC mains plug 
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

About Bluetooth

®

Frequency band

• This system uses the 2.4 GHz frequency band.

Certification

• This system conforms to the frequency restrictions and 

has received certification based on frequency laws. 
Thus, a wireless permit is not necessary.

• The actions below are punishable by law:

– Taking apart or modifying the main unit.
– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth

®

 

equipped devices is not guaranteed.

• All devices must conform to standards set by 

Bluetooth SIG, Inc.

• Depending on the specifications and settings of a 

device, it can fail to connect or some operations can be 
different.

• This system supports Bluetooth

®

 security features. But 

depending on the operating environment and/or 
settings, this security is possibly not sufficient. 
Transmit data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth

®

 

device.

Range of use

• Use this device at a maximum range of 10 m.
• The range can decrease depending on the 

environment, obstacles or interference.

Interference from other devices

• This system may not function properly and troubles 

such as noise and sound jumps may arise due to radio 
wave interference if this unit is located too close to 
other Bluetooth

®

 devices or the devices that use the 

2.4 GHz band.

• This system may not function properly if radio waves 

from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.
• Do not use this system near an equipment or in an 

environment that is sensitive to radio frequency 
interference (example: airports, hospitals, laboratories, 
etc.).

Licenses

Recording and playback of content on this or any other 
devices may require permission from the owner of the 
copyright or other such rights of that content. 
Panasonic has no authority to and does not grant you 
that permission and explicitly disclaims any right, ability 
or intention to obtain such permission on your behalf. It 
is your responsibility to ensure that your use of this or 
any other devices complies with applicable copyright 
legislation in your country. Please refer to that 
legislation for more information on the relevant laws and 
regulations involved or contact the owner of the rights 
of the content you wish to record or playback.

Figure A

Figure B

Figure A

Figure B

Fuse cover

Fuse (5 ampere)

Fuse (5 ampere)

Panasonic bears no responsibility for data and/or 
information that can possibly be compromised during a 
wireless transmission.

The Bluetooth

®

 word mark and logos are registered 

trademarks owned by Bluetooth SIG, Inc. and any use 
of such marks by Panasonic Corporation is under 
license. Other trademarks and trade names are those of 
their respective owners.

Google Play and Android are trademarks of Google Inc.

MPEG Layer-3 audio coding technology licensed from 
Fraunhofer IIS and Thomson.

SC-AKX600.400 EB.GN RQT9975-1B En.fm  Page 3  Friday, April 3, 2015  9:44 AM

Summary of Contents for SC-AKX400





















Reviews: