background image

Confidential 

Until:  

9 May 2014

2

R

Q

T9899

Do the procedures with the remote control. You can 
also use the buttons on the main unit if they are the 
same.

Your system and the illustrations can look differently.
These operating instructions are applicable to the 
following system.

User memo:

Inside of product

– If you see this symbol –

IMPORTANT SAFETY 
INSTRUCTIONS

Read these operating instructions carefully before using 
the unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these 
operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as 

radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your 
safety. If the provided plug does not fit into your 
outlet, consult an electrician for replacement of the 
obsolete outlet.

10. Protect the power cord from being walked on or 

pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus.

11. Only use attachments/accessories specified by the 

manufacturer.

12. Use only with the cart, stand, tripod, 

bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, use 
caution when moving the 
cart/apparatus combination to avoid 
injury from tip-over.

13. Unplug this apparatus during lightning storms or 

when unused for long periods of time.

14. Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.

System

SC-AKX18

Main unit

SA-AKX18

Speakers

SB-AKX18

The model number and serial number of this product 
can be found on either the back or the bottom of the 
unit. Please note them in the space provided below and 
keep for future reference.

MODEL NUMBER

SC-AKX18

SERIAL NUMBER

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

Information on Disposal in other Countries outside
the European Union

This symbol is only valid in the European 
Union.
If you wish to discard this product, please 
contact your local authorities or dealer and 
ask for the correct method of disposal.

This transmitter must not be co-located or operated in 
conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure 
limits set forth for an uncontrolled environment and 
meets the FCC radio frequency (RF) Exposure 
Guidelines in Supplement C to OET65. This equipment 
has very low levels of RF energy that is deemed to 
comply without maximum permissive exposure 
evaluation (MPE). But it is desirable that it should be 
installed and operated keeping the radiator at least 
20 cm (7 

⅞″

) or more away from person’s body 

(excluding extremities: hands, wrists, feet and ankles).

SC-AKX18 P RQT9899-P EN.fm  Page 2  Monday, April 14, 2014  10:41 AM

Summary of Contents for SC-AKX18





















Reviews: