16
RQT6243
Recording operations
B
A
1
OPEN
OPEN
C
3
2
Tab for side B
Normal position tape
Tab for side A
To protect tapes against further recording
Side A
Before recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but the unit will
not be able to record or erase them correctly.
Erasure prevention
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown.
How volume and sound quality affect recording
The tape you are recording is not affected whatsoever by changes in
volume and sound quality.
To erase a recorded sound
1
Press [
:
TAPE ] then [
L
STOP, –DEMO].
2
Insert the cassette with the side to be erased facing towards
you and the exposed tape facing down.
3
Press [
a
REC].
A
To re-record
B
Adhesive tape
Front side
Preparatory steps
Do these steps before each recording.
Wind up the leader tape so recording can begin immediately.
Press [
c
OPEN] and insert the cassette to
be recorded on.
Insert with the exposed tape facing down.
C
