![Panasonic SC-AK280 Operating Instructions Manual Download Page 24](http://html.mh-extra.com/html/panasonic/sc-ak280/sc-ak280_operating-instructions-manual_279029024.webp)
24
RQT8043
RQTX0202
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
■
Radio
Page
Distorted sound or
noise is heard.
The stereo indicator
fl ickers or does not light.
• Use an outdoor antenna.
7
A beat sound is heard.
• Turn the television off or move it away from the unit.
• Switch to either BP 1 or BP 2 when in AM tuner mode.
—
16
A low hum is heard
during AM broadcast.
• Separate the antenna from other cables and cords.
—
■
USB
No response when
[
¶
REC] and [TAPE]
buttons are pressed
consecutively.
• Disconnect the USB device and then reconnect it back. Alternatively,
turn the unit off and then turn back on.
—
The USB drive or its
contents cannot be
read.
• The USB drive format or its contents is/are not compatible with the
system.
• The USB host function of this product may not work with some USB
devices.
• USB devices with storage capacity of more than 8 gigabytes may not
work in some instances.
20
—
—
Slow operation of the
USB device.
• Large fi le size or high memory USB fl ash drive takes longer time to read.
—
■
Unit displays
“NO PLAY”
• Check the content.
• Only MP3 format fi les can be played.
—
—
“F61”
• Check and correct the speaker cords connection.
If this does not fi x the problem, consult the dealer.
• Disconnect the USB device. Turn the unit off and then turn back on.
6
—
“ERROR”
• Incorrect operation performed. Read the instructions and try again.
—
“ERROR” (during
recording)
• You are not able to select other playback source (example: radio, USB
and etc.) or press [
4
/
1
] or [
¡
/
¢
] during recording.
Stop the recording function.
14
“VBR–”
• The unit cannot display the remaining play time for variable bit rate
(VBR) tracks.
—
“– –:– –” (during
standby mode)
• You plugged the AC mains lead in for the fi rst time or there was a power
failure recently.
• Set the time.
—
17
“CHGR ERR” [disc
tray(s) cannot open]
• Press [
y
/I] to release the jammed tray(s) as the unit will switch off. Turn
it on again and the tray(s) will initialise to the previous tray(s) condition.
• If this still does not fi x the problem, please consult the dealer.
—
—
Troubleshooting guide (continued)
rqtx0202-B(en).indd 24
rqtx0202-B(en).indd 24
1/13/09 1:56:12 PM
1/13/09 1:56:12 PM