23
RQT8043
RQTX0202
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if
the solutions indicated in the chart do not solve the problem, consult your dealer for instructions.
■
Common problems
Page
When the unit is in
standby mode, the
display lights up and
changes continuously.
• Turn off the demo function.
• If you set the clock, demo function will be turned off automatically.
8
17
No response when
remote control buttons
are pressed.
• Check that the batteries are installed correctly.
8
Distorted sound or no
sound.
• Turn the volume up.
• Turn off the unit, determine and correct the cause, then turn the unit on
again.
It may be caused by straining of the speakers through excessive volume
or power, and using the unit in a hot environment.
—
—
A “humming” sound
can be heard during
play.
• An AC mains lead or fl uorescent light is near the unit. Keep other
appliances and cords away from the unit.
—
■
Discs
Incorrect display or play
will not start.
• You have not inserted the disc correctly; insert it correctly.
• Disc may be dirty. Wipe it clean.
• Replace the disc if it is scratched, warped, or non-standard.
• Condensation has formed: Wait 1 to 2 hours for it to evaporate.
8
—
—
—
The total number of
tracks displayed is
incorrect.
The disc cannot be read.
Distorted sound is
heard.
• You have inserted a disc the unit cannot play; insert one it can.
• You have inserted a disc that has not been fi nalised or completely
formatted.
—
—
■
Cassette tape
Poor sound quality.
• Clean the heads.
25
Recording cannot be
performed.
• If the erasure prevention tabs have been removed, cover the holes with
adhesive tape.
14
Troubleshooting guide
rqtx0202-B(en).indd 23
rqtx0202-B(en).indd 23
1/13/09 1:56:12 PM
1/13/09 1:56:12 PM
