10
4 Specifications
4.1.
Main Unit (SU-ZT1)
4.2.
Speaker Unit (SB-ZT1)
■
PRE AMPLIFIER SECTION
Input sensitivity / Input Impedance
TV, AUX3
600 mV / 47 k
Ω
S/N ratio (IHF A)
BD/DVD, TV, AUX1, AUX2 (Digital
Input)
80 dB (IHF ‘66)
Tone controls
BASS
50 Hz, +6 to -6 dB
TREBLE
20 kHz, +6 to -6 dB
Input / Output terminal
Audio Input
Analogue Input (TV, AUX3)
2
Optical Digital Input (TV, AUX2)
2
Audio Output
Audio Output (Front L/R, Surround
L/R)
4
Subwoofer Output
1
Headphone Output (16 to 64
Ω
)
1
Video/Audio
HDMI Input (BD/DVD, AUX1)
2
HDMI Output (TV)
1
This system supports “HDAVI Control 4” function.
■
MAIN UNIT GENERAL
Power supply
AC 220 to 240 V, 50 Hz (GN)
AC 110 to 240 V, 50/60 Hz (GS)
Power consumption
16 W
In standby condition
0.5 W
In standby condition (HDMI off
mode)
0.2 W
Dimensions (WxHxD)
430mm x 59mm x 262mm
Mass
Approx. 2 kg
Operating temperature range
0
°
C to 40
°
C
Operating humidity range
20% to 80% RH (no condensa-
tion)
■
WIRELESS SECTION
Frequency of the using band
2.4000 GHz to 2.4835 GHz
Number of using channels
3
The reaching distance
15m*1
*1 It is under the condition as follows.
At same room indoor, there is not an obstacle between the main unit
and the speaker.
And installing a main unit in the position with equal to or more than 50
cm height.
■
POWER AMPLIFIER SECTION*2
RMS output power (at AC 220 to 240 V)
10% total harmonic distortion
Woofer Speaker ch
60 W (100 Hz, 3
Ω
)
Mid High Speaker ch
20 W (1 kHz, 8
Ω
)
System Total Power*3
160 W (80 W + 80 W)
DIN output power (at AC 220 to 240 V)
1.0% total harmonic distortion
100Hz Woofer Speaker ch
40 W (3
Ω
)
1kHz Mid High Speaker ch
15 W (8
Ω
)
System Total Power*3
110 W (55 W + 55 W)
■
SPEAKER SECTION*2
2 way 5 speakers system (Bass reflex type)
Woofer part
12 cm cone type x 1
Mid High part
2.4 x 10 cm flat type x 4
■
SPEAKER GENERAL*2
Power supply
AC 220 to 240 V, 50 Hz (GN)
AC 110 to 240 V, 50/60 Hz (GS)
Power consumption
20 W
Wireless link standby
0.8 W
In standby condition
0.15 W
Dimensions (WxHxD)
290mm x 1231mm x 290mm
Mass
Approx. 3.9 kg
Operating temperature range
0
°
C to 40
°
C
Operating humidity range
20% to 80% RH (no condensa-
tion)
*2
: per 1 speaker
*3
: use 2 speakers
Note:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
2. Total harmonic distortion is measured by using AES17 filter.
■
System : SC-ZT1GN-S
Music center: SU-ZT1GN-K
Speaker: SB-ZT1GN-S1
■
System : SC-ZT1GS-S
Music center: SU-ZT1GS-K
Speaker: SB-ZT1GS-S1
Summary of Contents for SB-ZT1GN
