background image

RQT6901

3

Speaker setup

SB-FS702 or SB-FS802

These speakers are the same. Use them as front or surround speak-
ers.

SB-PC702 / SB-PC802

Use as the center speaker.

Before attaching to a wall or speaker stand

SB-FS702 / SB-PC702 / SB-FS802 / SB-PC802

Unscrew the screw to remove the stand.

Attaching to the wall

SB-FS702 / SB-PC702 / SB-FS802 / SB-PC802

Screw (not included)

Screw the wood screw into a thick and hard part of the wall.
The surface you attach the speakers to must be able to support over
10 k

g

.

Attaching to speaker stands

SB-FS702 / SB-FS802

Speaker stands (not included)
Plate thi 7 to 10 mm
Attach the stands with these holes.

Ensure the following conditions are met when you purchase your
speaker stands.

Observe the diameter and length of the screws and the distance

between screws as shown in the diagram.
Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
Distance between  the centers of the holes: 60 mm

The stands must be able to support over 10 k

g

.

The stands must be stable even if the speakers are in a high posi-

tion.

Do not attach these speakers to walls or ceilings using methods
other than those described here.

Location

Front speakers (

)

Put on either side of the television.

Center speaker (

)

Put above or below the center of the television, on a shelf or rack or
attach to the wall. Placing it directly on the television can cause the
picture to be distorted.

Surround speakers (

)

Put to the side of or slightly behind the seating area, about one meter
higher than ear level.

Subwoofer(

)

Place anywhere as long as it is a reasonable distance from the tele-
vision. Place it at least 5 cm from the wall as it has a bass reflex port
in the rear.

The front, center, and surround speakers should be placed at ap-
proximately the same distance from the listening position. The angles
in the diagram are approximate.
How you set up your speakers can affect the bass and the sound
field. Note the following points.

Place on flat, level secure bases.

Use spacers or a similar item to stop them from rocking.

Placing speakers too close to floors, walls, and corners can result

in excessive bass.

Cover walls and windows with thick curtain.

Do not place anything on top of the subwoofer.

;;

;;

;;

SB-FS702
SB-FS802

SB-FS702
SB-FS802

SB-FS702
SB-FS802

SB-PC702
SB-PC802

SB-PC702
SB-PC802

30-35 mm

ø7.5-9.5 mm

7-9 mm

100 mm

60 mm

5 mm
Pitch 0.8 mm

SB-PC702
SB-PC802

SB-FS702
SB-FS802

SB-FS702
SB-FS802

SB-FS702
SB-FS802

SB-WA54
SB-WA55

SB-FS702
SB-FS802

30

°

120

°

30

°

Summary of Contents for SB-TP20







Reviews: