5
RQ
T0
A6
2
Making the connections
Connect the AC mains lead only after all the other connections have been made.
1
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
2
Connect the FM indoor antenna.
Put the antenna where reception is best.
3
Connect the speakers.
Connect the speaker cables to the corresponding
terminals.
4
Connect the AC mains lead.
Do not use an AC mains lead from other equipment.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
For the United Kingdom and Ireland
Connect the FM outdoor antenna.
Use an outdoor antenna if reception is poor.
CAUTION!
Keep the antenna plug adaptor out of reach of
children to prevent swallowing.
Note:
•
Do not use the outdoor antenna during a lightning
storm.
•
Disconnect the outdoor antenna if you do not use the
system.
Adhesive tape
(not supplied)
Antenna plug adaptor
75
Ω
coaxial cable
(not supplied)
FM outdoor antenna
(not supplied)
(For the AC mains plug of three pins)
READ THE “Caution for AC mains lead” BEFORE
CONNECTION.
To household
mains socket
SC-AKX660 E.GN RQT0A62-B En.fm Page 5 Tuesday, March 1, 2016 8:47 AM
