background image

23

O

p

er

at

ions

R

Q

T

7523

Subwoofer level

You can adjust the volume of the subwoofer while listening to a source.
Select SW – – – to stop output.

The factory setting is SW 10.

• You cannot adjust the subwoofer level if DVD ANALOG 6CH is

selected.

• Sound can be distorted if you raise the volume while the subwoofer

level is high. Reduce the subwoofer level if this occurs.

Center focus

 

You can make the sound of the center speaker seem like it is coming
from within the television.

Center focus cannot be used in the following cases:

• When there is no center input signal.
• When the center speaker is not selected in the speakers settings.
• When 2CH MIX is on.
• When MUSIC mode is selected while using Dolby Pro Logic 

x.

Multi rear surround

 

This mode makes it seem like sound is coming virtually from the
multiple rear surround speakers when connected with the surround
speaker.

Multi rear surround cannot be used in the following cases:

• When there is no surround input signal.
• When the surround channel is monaural.
• When the surround speaker is not selected in the speakers settings.
• When 2CH MIX is on.
• When MUSIC mode is selected while using Dolby Pro Logic 

x.

HQ sound mode

This mode ensures that sound with a greater purity is played by closing
down the unit’s circuits such as display and video output.
(

á

 refer to HQ Sound Mode/HQ MODE setting, page 11).

You can only raise the volume to –12 dB when HQ sound mode is on. 
It will be automatically lowered to this level if you turn HQ sound mode
on when the level is higher.
• You cannot use this mode when selecting TUNER.

For your reference

The center focus or multi rear surround cannot be used in the following cases.

• When input signal is monaural, DTS 96/24, PCM or analog stereo.
• Dolby Pro Logic 

, DTS NEO:6 or SFC is on.

• When input signal is 2-channel while using Dolby Pro Logic 

x.

• When multi-source re-master is on.
• When DVD ANALOG 6CH is selected.
• When the input signal is multi-channel DVD-Audio from a HDMI connection.

HELP

HQ SOUND

MODE

TV/VIDEO

DVD RECORDER

DVD/HDD

SUBWOOFER

-TEST

-SETUP

+

CENTER

FOCUS

MULTI

REAR

LEVEL

EFFECT

SFC

STEREO/

2CH MIX

PL   

x

DTS

NEO:6

q

r

w

NAVIGATOR

LIST

DISPLAY

RETURN

TV VOL –

TV VOL +

ENTER

q

w

SUBWOOFER

CENTER

FOCUS

MULTI

REAR

HQ SOUND

MODE

SUBWOOFER

SW    10

---, MIN, 5, 10, 15, MAX

CENTER

FOCUS

C.FOCUS

• To  cancel

Press [CENTER FOCUS].

MULTI

REAR

M.REAR

• To  cancel

Press [MULTI REAR].

HQ SOUND

MODE

HQ  ON

• To cancel

Press [HQ SOUND MODE].

Summary of Contents for SA-XR70S





























Reviews: