Panasonic SA-XR10E, Service Manual

Page: 23 / 102

Pin
NO. Terminal
Name
I/O Function
54 VR_DOWN_
LED
O Volum down LED control
signal output
55 FAN_OUT O FAN control signal output
56 LIGHT O Back light control signal
output
57-
90
LCD38-
LCD5
O LCD segment signal output
91 VCC - Power supply terminal (+5V)
92 VREF - Reference power supply
terminal (+5V)
93 AVSS - GND terminal
94-
97
LCD4-LCD1 O LCD common signal output
98,
99
VL3, VL2 I LCD drive bias input
100 NC - Not used, open
14. Replacement Parts List
Notes:
* Important safety notice:
Components identified by mark have special characteristics important for
safety.
Furthermore, special parts which have purposes of fire-retardant (resistors),
high-quality sound (capacitors), low-noise (resistors), etc. are used.
Whenreplacing any of components, be sure to use only manufacture's specified
parts shown in the parts list.
* The parenthesized indications in the Remarks columns specify the areas.
Parts without these indications can be used for all areas.
* Remote Control Ass'y: Supply period for three years from terminal of
production.
* Capacity values are in microfarads (uF) unless specified otherwise, P=Pico-
farads(pF), F=Farads (F)
* Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM),
1M=1,000K (OHM)
* "<IA>, <IB>, <IC>, <ID>, <IE>" marks in Remarks indicate languages of
instruction manuals.
[<IA> : German/Italian/French/Netherlands/Swedish
/Danish, <IB> : English, <IC> : Spanish/Russian/Polish
23