Follow (step 1) in item 1.5.
2. Connection of the Speaker Cables
- Be sure to connect speaker cables before connecting the AC power
supply cord.
- The load impedance of any speaker used with this unit must be 4 .
- Be sure to connect the cable from the right speaker to the right terminal
and the cable from the left speaker to the left terminal.
1. Twist and pull off the vinyl tip of the speaker cords. If the speaker
cords do not have vinyl tips, connect them directly to the terminals.
Make sure the bare ends of the wires are not unravelled.
2. Insert the wire to the rear panel of the unit and close the lever.
Notes :
- To prevent damage to circuitry, never short-circuit positive (+) and
negative (-) speaker wires.
- Be sure to connect only positive (red) wires to positive (+) terminals and
negative (black) wires to negative (-) terminals.
Positioning
7
Summary of Contents for SA-VK650
Page 10: ...4 2 Packaging 10 ...
