Step 11
Remove the tray lock spring from hook,and then latch
to the tray lock.
Step 12
Install the UP/DOWN gear, change gear, change gear
spring, pulley gear and belt in the order of (1) - (5).
Step 13
Install the gear holder, and then tighten the screw (a).
Step 14
Install the tray base, traverse ass’y, mechanism cover
and upper plate.
[Operation check after servicing]
Check the proper operation of following items with gear and
hexagonal screwdriver.
1. Open/close of tray base.
2. Moving the tray base to the stock side.
3. UP/DOWN operation of spindle base unit.
4. UP/DOWN operation of traverse ass’y.
9.6.4. Replacement for the motor ass’y
Step 1
Install the belt temporarily.
NOTE:
Take care not apply the grease to the belt.
Step 2
Upset the CD loading unit.
Step 3
Remove 3 screws.
28
SA-VK31EE
Summary of Contents for SA-VK31EE
