Panasonic SA-PM3E, Service Manual

Page: 74 / 133

Pin No. Mark I/O Function
26 RMT I Remocon Input
27 HALT I AC Failure Detect Signal
28 CD_OPEN /
_SW
I CD Open Switch (L:
Open, H: Close)
29 RESTSW I CD Tranverse Limit SW
30 BLKCK I CD Subcode Block
Clock Input
31 N.C. - No Connection
32 N.C. - No Connection
33 NRST I Micom Reset (L: Reset)
34 N.C. - No Connection
35 CD RST O CD Reset Output
36 CD_MLD O CD LSI Command Load
37 N.C. - No Connection
38 N.C. - No Connection
39 N.C. - No Connection
40 FL_CS O FL Strobe Output
41 N.C. - No Connection
42 FL_DATA O FL Data Output
43 N.C. - No Connection
44 FL_CLK O FL Clock Output
45 SDA I/O IIC Data Line For Tuner
46 N.C. - No Connection
47 CL O IIC Clock Signal For
Tuner
48 N.C. - No Connection
49 PCONT_2 O Power Control Output2
(PWR AMP, active H)
50 DEMO I Demo Mode Setting (H:
OFF, L: ON)
51 N.C. - No Connection
52 HP_SW - No Connection
53 MUTE A O Audio Mute O/P (L: Mute
On)
54 N.C. - No Connection
55 N.C. - No Connection
56 ASP_CLK O ASP CLK
57 ASP_DAT O ASP Data
58 N.C. - No Connection
59 N.C. - No Connection
60 N.C. - No Connection
61 EDATA I/O Eeprom Data In/Out
62 ECLK O Eeprom Clock Output
63 ECS O Eeprom CS Output
64 N.C. - No Connection
74