Panasonic SA-HT720P, Service Manual

Page: 23 / 75

Error Code Error Content Additional error explanation
F890 Sending message when message is
being sent to AV task Sending message to AV task
F891 Message couldn’t be sent to AV task Begin sending message to AV task
F893 FROM falsification
F894 EEPROM abnormality
F895 Language area abnormality Firm version agreement check for factory preset setting failure prevention
F896 No existence model Firm version agreement check for factory preset setting failure prevention
F897 Initialize is not completed Initialize completion check for factory preset setting failure prevention
F898 Disagreement of hardware and
software
Unsuitable combination of AV DECORDER, SDRAM and FLASH ROM
(firmware)
F8A0 Message command is not appropriate Begin sending message to AV task
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
12.4. Last Error Code saved during NO PLAY
Error code Error Content System computer Setting task System computer internal error code
F0BF 6) Cannot playback because
physical layer is not recognizable
PCND_NOPLAY PHYSICAL
0x50
DriveManager 0xDOBF
F0C0 8) DVD: Cannot playback because it
is not DVD Video/Audio/VR PCND_NOPLAY VIDEO 0x70 DiscManager 0xDOC0
F0C1 9) DVD: Prohibited by the restricted
region code PCND_NOPLAY RCD 0x80 DiscManager 0xDOC1
F0C2 A) DVD: PAL restricted playback PCND_NOPLAY PAL 0x90 DiscManager 0xDOC2
F0C3 B) DVD: Parental lock setting
prohibits the playback of the entire
title
PCND_NOPLAY PTL 0xA0 DiscManager 0xDOC3
F0C4 C) VCD: Prohibited because it is in
PHOTO CD format PCND_NOPLAY PHOTO CD
0xB0
DiscManager 0xDOC4
F0C5 VCD/CD: Prohibited because it is
CDROM without CD-DA PCND_NOPLAY CDROM 0xC0 DiscManager 0xDOC5
23
SA-HT720P / SA-HT720PC