Panasonic SA-HT530EB, Service Manual

Page: 28 / 152

Error Code Meaning Details
F890 A message is sent during AV task
transmission During transmission of a message to AV task
F891 Unable to transmit a message to AV
task When transmission of a message to AV task starts
F893 FROM altered
F894 EEPROM failure
F8A0 Unsuitable message command When transmission of a message to AV task starts
15.5. Mode Table 2
Following modes are available with combinations of the pressed buttons on the player and on
the remote controller unit.
Item Operational
Condition and
Key Function
Details Display To
Jitter
display While the player
is stopped and
no disc is
inserted, press
and hold down
the button
on the player
and the number
button, “5” on
the remote
controller unit.
Jitter display / Measures and
displays jitter. Measurement
is repeated every second.
Read error counter starts at
0 at the mode setting, and
increased by one as data
read fails at target block. A
small defect is allowed to
correct by retry. Any
possibility is counted as one
increment. Repetitive errors
after retry increase by two
levels or more. J *1 xxx *2 _yyy *3 _zz *4 / / *1 :
Jitter display mode /
*2
: Jitter
measurement value /
*3
: Read
error counter
/ *4
: Focus
driving value
Values are shown to one
decimal place in the decimal
digit.Focus driving value is
displayed in the hexadecimal
digit.
Press
STOP
OPEN
Error code
display While the player
is stopped and
no disc is
inserted, press
and hold down
the button
on the player
and the number
button, “0” on
the remote
controller unit.
Error code display / Displays
the latest error code stored
in EEPROM. DVDnn_F--- / *nn: Error history
/ *--: Error number Automatically
exits
mode
five
28