Panasonic SA-DT310, Service Manual

Page: 8 / 68

breaks down. (Check and replace.)
6.3.3. F76
- Problem or condition
When the Standby/on switch is switched on, it automatically
switches back off, making it impossible to switch power on.
- Correction procedure
Faulty AV control receiver (SA-DT310) power supply signal line.
(Check and replace.)
7. Operation Checks and Component Replacement /
Procedures
- This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
- For reassembly after operation checks or replacement, reverse the
respective procedures. Special reassembly procedures are
described only when required.
7.1. Checking for the main P.C.B.
8