Step 5
Remove 2 screws.
Step 7
Slightly lift up the CD Mechanism Unit (BRS11C) as
shown.
Caution: Do not exert too much force as it may damage the
wiring within.
Step 8
Detach 10P FFC at the connector (FP8251) on CD
Servo P.C.B..
Step 9
Detach 24P FFC at the connector (FP8201) on CD
Servo P.C.B..
Step 10
Remove the CD Mechanism Unit (BRS11C).
11.27. Disassembly of CD Interface
P.C.B.
•
Refer to “Disassembly of CD Mechanism Unit
(BRS11C)”.
Step 1
Remove 3 screws.
Step 2
Desolder pins of the motor (M7301).
Step 3
Desolder pins of the motor (M7302).
63
Summary of Contents for SA-AKX74LM-K
