26
Step 3 Lift up to detach Chassis Unit.
Step 4 Release tabs.
Step 5 Release Rear Panel.
8.9.
Disassembly of Main P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Rear Panel”.
Step 1 Detach 10P Cable Wire at the connector (CON2) on
SMPS Module.
Step 2 Detach 24P FFC at the connector (P2005) on Main
P.C.B..
Step 3 Detach 10P FFC at the connector (P2004) on Main
P.C.B..
Step 4 Detach 22P FFC at the connector (CN2500) on Main
P.C.B..
Step 5 Detach 8P Cable at the connector (CN2502) on Main
P.C.B..
Step 6 Remove 2 screws.
Step 7 Remove Main P.C.B..
Summary of Contents for SA-AKX38PH
