27
8.10. Disassembly of SMPS Module
and Voltage Selector P.C.B.
(PH)
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Rear Panel”.
Step 1 Detach 10P Cable Wire at the connector (CON2) on
SMPS Module.
Step 2 Remove 2 screws.
Step 3 Release catch.
Step 4 Remove SMPS Module and Voltage Selector P.C.B.
(PH).
8.11. Disassembly of CD Mecha-
nism Unit
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove 8 screws.
Step 2 Detach Voltage Selector P.C.B..
Step 3 Detach 10P FFC at a connector (P2004) on Main
P.C.B..
Step 4 Detach 24P FFC at a connector (P2005) on Main
P.C.B..
Step 5 Remove 1 screw.
Summary of Contents for SA-AKX38PH
