Panasonic SA-AK640E Service Manual Download Page 173 | Manualshive

Page: 173 / 266

background image

3 Mechanism Operation Description

3.1. General Feature

·

This is a five disc changer mechanism for CD/DVD. The outline figure is shown below.

·

The mechanism has

"CHANGE WHILE PLAY"

function. It open other trays for disc exchanging while one tray is at PLAY

position performing recording or reproducing.

·

The mechanism can quickly change all trays with

"CHANGE ALL"

function. All trays can be move to OPEN position with one

operation.

·

There is no sensor to indicate presence of disc on any tray.

3.2. Hardware composition

·

Below is the hardware components of the mechanism

Name

Function

Open Switch (OPEN-SW)

The switch is used to detect normal tray opening
The switch is used for detect tray being manually push/trigger when full open

Home Switch (HOME-SW)

Is used to detect cam gear home position

Close Sensor (CLOSE-SENSOR)

Used for normal single tray closing
Used to detect cam gear rotate to Play Driving position

Play Switch (PLAY-SW)

Detect TRV clamping complete position

Stocking Switch (STOCK-SW)

Detect tray completely transfer for play position to stocking positi

UD Sensor (UD-SENSOR)

Detect TRV vertical movement position

Top Switch (TOP-SW)

Detect a default position of TRV vertical movement position

Driver IC

To drive Motor

Motor

Main driving source for changer

Plunger

Switching the driving source from motor to:
1.

Tray open/close

2. Drive tray to play/stock position and TRV vertical movemen

3.3. Mechanism Operation

·

This mechanism has the following state:

1. Driving of a tray to open/close
2. Up/down operation of a traverse performs a state changes of tray.
By using the plunger to lift/release of a switching gear, and the cam gear to lift/release the function gear the motor can be link
to several gear trains to perform various operations.

·

The functions that can be perform in this mechanism are described as below:

Condition

Explanation

Open current playing tray

The state to change current playing disc. All tray will be open at once and current tray at PLAY position
will be expose.

Open All

The state where all trays being driven to OPEN position. The disc can be taken in or out from tray to tray
by close tray one by one from top to bottom.

Stock

The state where the trays are stored in STOCK position

Play

The state where one of the tray 5 trays is being driven to PLAY position and clamped by traverse unit

9

CRS1

«
...
171
172
173
174
175
...
»

Summary of Contents for SA-AK640E











































































































































































































































































Reviews:

No comments

Related manuals for SA-AK640E

Welcome M21311P1-A

Brand: ABB Pages: 15

Brand: NAD Pages: 2

Brand: salmson Pages: 12

Brand: ICP DAS USA Pages: 4

Brand: Yamaha Pages: 2

Brand: Olimpia splendid Pages: 40

Subwoofer KHT2005.2

Brand: KEF Pages: 2

Brand: KEF Pages: 7

Brand: KEF Pages: 4

Brand: Panasonic Pages: 2

Brand: dB Technologies Pages: 98

Brand: Aeta Audio Systems Pages: 24

Brand: M-system Pages: 7

Power2 S-MIG 100

Brand: STAMOS Pages: 33

Kontron 3.5"-eIO-GPA

Brand: S&T Pages: 37

Brand: Eaton Pages: 36

EVERPURE CONSERV LT-S

Brand: Pentair Pages: 20

Brand: MOSA Weld Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands