Panasonic SA-AK450P, Service Manual

Page: 26 / 105

· Only the first 5 errors will be memorized (in backup memory). The subsequence error shall be ignored and not memorize.
For system with EEPROM as memory backup,memory space in EEPROM is neccesary.
2. To display all error code memorized
In CRS1 Self-Diagnostic mode, press [SINGLE CHANGE] to display subsequence error code.
It shall repeat after reaching error no. 5.
e.g.:
[1 _ _ _ _ I H M S]
→
[SINGLE CHANGE]
[2 _ _ _ _ I T O P]
→
[SINGLE CHANGE]
[3 _ _ _ _ H O M E]
→
[SINGLE CHANGE]
[4 _ _ _ _ L O A D]
→
[SINGLE CHANGE]
[5 _ _ _ _ _ U D D]
→
[SINGLE CHANGE]
3. To clear the error code memory
In CRS1 Self-Diagnostic mode, long press [SINGLE CHANGE] key (2s or more)
9.5. XM Satellite Radio Code Table
Error Code Diagnosis Contents Description of Contents Automatic FL Display Remarks
XM RADIO XM Radio Selection It takes a short time for the XM radio to
power up after selecting the source on the
main unit. During this time, the FL display
shows the message. Wait for a few seconds
for the process to complete. If not, check on
the XM antenna if it is connected or
damaged.
(Flashing)
ANTENNA XM Connectivity The XM antenna is not properly connected
or the antenna cable is damaged.
(Flashing)
For more information,
refer
to operating
instruction manual for
connection of antenna.
UPDATING XM Encryption Code 1) The XM antenna is being updated with
the latest encryption code.
(Wait for few seconds for the updating to
be completed.)
2) The selected XM channel has been
blocked, or is no longer available with the
subscription package.
(Flashing)
NO SIGNL XM Signal receptivity The XM Signal is too weak.
Re-oriented the XM antenna for better
reception.
(Flashing)
For more information,
refer
to operating
instruction manual for
optimizing the signal
reception.
OFF AIR XM Channel
Broadcasting
The selected XM channel is not currently
broadcasting information.
(Flashing)
For more information,
refer
to operating
instruction manual for
selection
of the
channels.
XM - - - XM Channel
Broadcasting
The selected XM channel is not available.
Selection of a different channel.
(Flashing)
For more information,
refer
to operating
instruction manual for
selection
of the
channels.
XM ERROR XM Module
Abnormality
The XM radio module is performing
abnormally. Turn the main unit off and
power on. The XM antenna may be
defective.
(Flashing)
Special Note: XM Satellite Radio ID is necessary for the activation of the XM Satellite Radio.
26
SA-AK450P / SA-AK450PC