Panasonic SA-AK240P, Service Manual

Page: 19 / 104

The error code is automatically display after entering into self-diagnostic mode.
Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
H01 Mode SW, plunger
and capstan motor
abnormal For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
H02 Rec INH SW
abnormal For deck mechanism unit (For deck 2).
Press [
] on main unit for
next error.
H03 HALF SW abnormal For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
F01
F02
Reel pulse abnormal
TPS error
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
F15 RESET SW
abnormal REST SW: ON is not
detected
within the
specified time.
For CD unit (For Traverse).
Press [
] on main unit for
next error.
F26 Transmission error
between CD Servo
LSI IC and
microprocessor IC When set to CD mode,
the sense signal does
not turn “Low”, a fail
safe time after system
command transmission
is sent. For CD unit (For Traverse).
Press [
] on main unit for
next error.
F61 Power Amp IC output
abnormal Upon power on,
PCONT=HIGH,
DCDET=L
after
checking LSI.
For power.
Press [
] on main unit for
next error.
IHMS Cam gear
abnormality Cam gear does not
rotate
to “HOME”
position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
ICSL Cam gear/gear units
abnormal Cam gear does not
rotate to “PLAY” driving
position
and hence
does not drive playing
tray
to “STOCK”
position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
ISTK Drive rack/gear
assembly abnormal The tray drive rack does
not move to “STOCK”
position. (Tray does not
move
to “STOCK”
position)
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
IPLY Drive rack/gear
assembly abnormal The tray drive rack does
not move to “PLAY”
position. (Tray does not
move
to “PLAY”
position)
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
19
SA-AK240P / SA-AK240PC