58
5
Select one of the Setting Data “YYYY” by pressing the or
button.
* Setting data “YYYY”
Setting data
Flap position during operation
0000
Without separate setting
0001
Swing
0002
Move to position
1
and stay
0003
Move to position
2
and stay
0004
Move to position
3
and stay
0005
Move to position
4
and stay
0006
Move to position
5
and stay
N OT E
The flap swings during the operation under “Setting the Flap Separately”.
At this time, the unselected flaps are moved to the position 1 .
After selecting “Set data”, press the button. (If setting continuously, follow the procedures
from Step
3
.)
6
If the button is pressed under the display Step
3
, the
following display (Detailed setting-end screen) appears.
Then select “YES” by pressing the or button and press
the button.
N OT E
The wired remote controller illustrated below can also be available following the same
procedures as above.
8. HOW TO INSTALL WIRELESS REMOTE CONTROLLER
N OT E
Refer to the Installation Instructions attached to the optional Wireless Remote Controller.
Detailed settings
[
]
Unit no.
Code no.
1-1
0000XX
Set data
0001
YYYY
]
Confrm
[
]
Detailed settings
[
]
[
]
Unit no.
Code no.
1-1
10
Set data
0001
0001
Exit detailed
settings
and restart?
YES
NO
1
2
3
4
5
Flap position
White
01_350115_EU_Eng.indb 58
2023/3/1 13:53:05
