4
RQT7635
Connect the speaker cords
A
Attaching the speakers
B
Detaching the speakers
C
Before attaching or detaching the speakers,
Be sure to disconnect the speaker cords.
Be sure to set [SELECTOR] to “TAPE/
”.
• The function selector switch does not separate entire unit from
mains even if in “TAPE/
” position.
OPR OFF
OPR OFF
Caution
• Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier and/or
the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has occurred
or if you experience a sudden change in performance.
• Do not attach these speakers to walls or ceilings.
Speaker connection
1
2
Connect only positive (red) wires to positive
terminals and
negative (black) wires to negative
terminals.
Unlock the speaker release levers by pulling them in direction shown
as illustrated, and slide each speaker up.
RELEASE
RELEASE
Connect the speaker cords
A
Detaching the speakers
C
Attaching the speakers
B
Align the speaker with the main unit as shown in the figure, interlock
the grooves and press down.
RX-CS40̲RQT7635 04.2.6 10:30 ページ 4
