VQT2Y39
34
Symptom
Checkpoints
Display
“
” appears.
• The operation program is damaged. Consult your dealer.
“
” appears.
• You tried to play the file that cannot be played on this unit, or the file is damaged. Delete this file.
If the problem persists, the file system is damaged. Perform formatting on this unit (All data is
erased after formatting is complete.) (
➜
page 12).
“
” appears.
• You entered a wrong password. Enter the correct password (
➜
page 21).
Record
The memory is used completely
earlier than expected.
(“
” is displayed earlier than
expected.)
• Remaining recording time largely differs depending on the recording mode (
➜
page 39). Select a
suitable recording mode according to the purpose for use (
➜
pages 8, 15).
• If you lower the Bit Rate for ripping music CDs, more songs will be saved (
➜
page 30).
• Is much data stored? Delete unnecessary data (
➜
page 26).
Recording is suspended by itself.
• VAS is functioning (
➜
page 16).
Howling occurs when listening to the
recording in progress with earphones.
• Turn down the volume (
➜
page 10). • Keep earphones and this unit separate.
• When you are using an external microphone, keep earphones and external microphone separate.
Recording ended halfway.
• The data may not be updated if the unit receives a shock (e.g. it is dropped), or the batteries
come off during recording.
“
” appears instead of the recording date.
• Set the time (
➜
page 7).
“
” is not displayed.
• You are using the external microphone (
➜
page 15).
Playing
No sound from the speaker.
• There is no sound when you have connected earphones (
➜
page 11).
Cannot play the recorded file though
it was recorded on this unit.
• The file name was changed. Only files named according to the file naming rules (
➜
page 27) can
be played in folder A through D.
Playback speed is too fast or slow.
• You changed the playback speed (
➜
page 17).
Troubleshooting guide
