background image

7

Panasonic bears no responsibility for data and/or information that is 

compromised during a wireless transmission.

 

Frequency band used

This unit uses the 2.4 GHz frequency band.

 

Certification of this unit

 •This unit conforms to frequency restrictions and has received certification 

based on frequency laws. Thus, a wireless permit is not necessary.

 •The actions below are punishable by law in some countries: 

– Taking apart/modifying the unit. 

–  Removing specification indications.

 

Restrictions of use

 •Wireless transmission and/or usage with all Bluetooth

®

 equipped devices is 

not guaranteed.

 •All devices must conform to standards set by Bluetooth SIG, Inc.

 •Depending on the specifications and settings of a device, it can fail to connect 

or some operations can be different.

 •This system supports Bluetooth

®

 security features. But depending on the 

operating environment and/or settings, this security may not be sufficient. 

Transmit data wirelessly to this system with caution.

 •This system cannot transmit data to a Bluetooth

®

 device.

 

Range of use

Use this unit at a maximum range of 10 m (33 feet).

The range can decrease depending on the environment, obstacles or 

interference.

 

Interference from other devices

 •This unit may not function properly and troubles such as noise and sound 

jumps may arise due to radio wave interference if this unit is located too close 

to other Bluetooth

®

 devices or the devices that use the 2.4 GHz band.

 •This unit may not function properly if radio waves from a nearby broadcasting 

station, etc. is too strong.

 

Intended usage

 •This unit is for normal, general use only.

 •Do not use this system near an equipment or in an environment that is 

sensitive to radio frequency interference (example: airports, hospitals, 

laboratories, etc.).

About Bluetooth

®

Clean this unit with a dry and soft cloth. 

 •Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a 

chemical wiper, etc. This might cause the exterior case to be deformed or the 

coating to come off.

Keeping the battery performance

 •During the long period of disuse, full charge this unit once every 6 months to 

keep the battery performance.

Copyright, etc.

 

The Bluetooth

®

 word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is 

under license. 

Other trademarks and trade names are those of their respective owners.

 

Other system names and product names appearing in this document are in 

general the registered trademarks or trademarks of the respective developer 

companies. 

Note that the ™ mark and 

®

 mark do not appear in this document.

Maintenance

The serial number of this product can be found on the right earphone. Remove 

the USB lid to see it.

Please note them in the space provided below and keep for future reference.

MODEL NUMBER

   RP-BTS30 

SERIAL NUMBER   

User memo:

DATE OF PURCHASE   

DEALER NAME   

DEALER ADDRESS   

TELEPHONE NUMBER   

Summary of Contents for RP-BTS30













Reviews:

Related manuals for RP-BTS30