Panasonic Road Choice 1000-RIO160U Operating Instructions Manual Download Page 5

Notes on Discs

Before Reading These Instructions

How to hold the disc

¡

 Do not touch the underside of the disc.

¡

 Do not scratch the disc.

¡

 Do not bend disc.

¡

 When not in use, keep disc in the case.

Unusable discs

Do not use discs that fit any of the descriptions given 

below. Using these discs may damage the discs or cause 

the unit to malfunction.

¡

 Special discs in a shape which is not round

¡

 Partly or wholly transparent disc

Wholly transparent disc*

Partly transparent disc

*Wholly semi-transparent disc may not be played back.

¡

 Discs with adhered labels, etc. on them

Disc with adhered stickers 

or tape

Labels created by a printer

Protective films or sheets

Disc accessories (stabiliz-

ers, etc.)

¡

 Damaged or deformed discs

Shoddily made discs

Discs with cracks, scratches 

or parts missing

Discs with burrs

Please remove the burrs before use.

Disc insert

The surfaces of new discs tend to be slippery. Therefore, 

when using such a disc for the first time, it may not load 

satisfactorily even when it has been inserted into the unit. At 

a time like this, insert the disc into the unit as far as it will go 

until it is loaded properly.

¡

 When inserting a disc into or ejecting and removing it 

from the unit, insert it straight in or eject and remove 

it straight out in parallel with the unit. Otherwise, the 

disc may be scratched or marked in the process.

¡

 When inserting a disc, do not put one disc on another. 

Failure to observe this may cause the discs to be 

jammed.

Do not leave discs in the following places:

¡

 Direct sunlight

¡

 Near heaters

¡

 Dirty, dusty and damp areas

¡

 On seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center outward.

Do not attach any seals or labels to your discs.

Do not write on the disc label in a heavy pen or ballpoint 

pen.

<Correct>

<Wrong>

Notes on CD-Rs/RWs

¡

 You may have trouble playing back some CD-R/RW discs 

recorded on CD recorders (CD-R/RW drives), either due 

to their recording characteristics or dirt, fingerprints, 

scratches, etc. on the disc surface.

¡

 CD-R/RW discs are less resistant to high temperatures 

and high humidity than ordinary music CDs. Leaving 

them inside a vehicle for extended periods may damage 

and make playback impossible.

¡

 The unit may not successfully playback a CD-R/RW that 

was made by the combination of writing software, a CD 

recorder (CD-R/RW drives) and a disc if they are incom-

patible with one another

.

¡

 This player does not play CD-R/RW discs if the session is 

not closed.

¡

 Be sure to observe the handling instructions of CD-R/RW 

discs.

¡

 This player does not play CD-R/RW discs which contain 

other than CD-DA or MP3 data.

Panasonic welcomes you to our constantly growing family of electronic products owners.

We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully se-

lected components, and assembled by people who are proud of the reputation their work has built for our company. We know 

this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into 

it, you too will be proud to be a member of our family.

Pana Pacific

Limited Warranty Agreement

Pana Pacific warrants vehicle audio products it distributes in the United States, to be free from defects in material and 
workmanship, in accordance with the following.

For twelve months after delivery, we will repair or at our option replace at no charge any audio product which, under 
normal conditions of use and service proves to be defective in materials or workmanship. However, this warranty does 
not cover expenses incurred in the removal or reinstallation of any audio product, whether or not proven defective. This 
warranty is limited to the original consumer purchaser and is not transferable. Repaired and replaced products shall 
assume the identity of the original for the purpose of this warranty and this warranty shall not be extended with respect 
to such products.

To obtain performance of this warranty, contact Pana Pacific warranty return center by phone at 1-800-848-6560. A 
dated purchase receipt or other proof that the product is within the warranty period will be required in order to honor 
the claim.

Specifically excluded from this warranty are failures caused by, misuse, neglect, abuse, improper operation or installa

-

tion, dropping or damaging a faceplate, unauthorized service or parts, or failure to follow normal maintenance activities. 
Also excluded from this warranty are the correction of improper installation and the elimination of external electromag-
netic interference including but not limited to satellite radio FM modulation performance.

This warranty sets forth the exclusive remedies with respect to the products covered by it. We shall not be held liable 
for any incidental, consequential, special, or punitive damages arising from the sale, use, or distribution of any audio 
products. No attempt to alter, modify, or amend this warranty shall be effective unless authorized in writing by an officer 
of Pana Pacific Inc.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state in the 
United States of America. In the event any provision, or any part or portions of this warranty shall be found invalid, void 
or otherwise unenforceable, such holding shall not affect the remaining part or portion of that provision or any other 
provision hereof.

Summary of Contents for Road Choice 1000-RIO160U

















Reviews: