background image

17

4. Adjust the length of the legrest when the backs of your 

calves or knees are not resting in the legrest wells.

Pull the legrest slide lever

to adjust the length of the 

legrest. (See Page 13)

user

5. When the massage is finished the unit will automatically shut off. 

                      and        last approximately 15 minutes.  

     lasts approximately 5 minutes. 

When the unit switches off…

                    will flash, indicating that the unit is in user memory data saving mode.  

• When no data has been recorded there is no need to press any buttons. The unit will switch off after approximately 

10 seconds. 

• When the massage is ended by pressing       , the unit will not go into the data saving mode. 
• Please see pages 22 through 24 for details on how to use the user memory function. 

Press        twice to return the backrest and legrest to 
the upright position. 

Note: The backrest and legrest may stop mid-way if an occupant 

cannot be detected. 

The unit will remain in

the reclining position of the

massage when it shuts off. 

To stop mid-way through a massage, press       . 

• The massage heads will return to the retracted position. 
• The backrest and legrest will automatically return to the 

upright position. 

Note: The backrest and legrest may stop mid-way if an 

occupant cannot be detected.  

To immediately stop the massage, 

press       . 

• All operations will stop immediately. 
• The chair will remain in the exact 

position it was in when the button was 
pressed.

Summary of Contents for RealPro Elite EP3222










































Reviews: