manualshive.com logo in svg

Panasonic PX380G-BS300, Operating Instructions Manual

Share
Download
Panasonic PX380G-BS300 Operating Instructions Manual Download Page 5

Read this first!

– 5 –

TO REMOVE BATTERY

Main Power Battery (Ni-Cd / Ni-MH / Li-ion Battery)

•  To detach the battery, please proceed in the reverse order of the installation method described in this manual.

•  If a battery made by any other manufacturer is to be used, check the Operating Instructions accompanying the battery.

Back-up Battery (Lithium Battery)

•  For the removal of the battery for disposal at the end of its service life, please consult your dealer.

Battery recycling symbol (valid only in Taiwan)

 

r

The symbols on this product (including the accessories) represent the following. (Some 

symbols are not displayed on this unit.)

ON

Standby (OFF)

d

AC

e

DC
Class II equipment (The construction of the product is double-insulated.)

Summary of Contents for PX380G-BS300






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands