Panasonic PVQ-1312W Service Manual Download

Page: 163 / 251

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

VIDEO IN

AUDIO IN

POWER

VOL

STOP/EJECT REW/

PLAY/REPEAT FF/

REC TIMER/FM

ACTION

REC ON TIMER

VIDEO IN

AUDIO IN

POWER

VOL

STOP/EJECT REW/

PLAY/REPEAT FF/

REC TIMER/FM

ACTION

REC ON TIMER PROG TIMER

PROG TIMER

TV Operation

Press POWER* on the remote or unit.

■

Using the 100 key

When selecting CABLE channels 100 to 125 with the number keys, first press the 100

key, and then enter the remaining two digits.

■

Rapid Tune

Press R-TUNE to display the last channel you were watching.

■

Audio Mute

Press MUTE to instantly mute the sound. Press again to restore the previous sound level.

■

Phones

Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack.

NIGHT (NITE) Mode

Color and picture intensity levels are adjusted so the screen
is easier on your eyes during night time use.

Press NITE to set
NIGHT mode.

• NIGHT mode may be

selected when watching TV
or playing a tape.

Press NITE to cancel.

• Previous settings are restored.
• NIGHT mode is canceled

when power is turned off or
power failure occurs.

N I GHT

Ready Check List

All connections are made.
Your unit is plugged in.

Use CH

number keys to
select a channel.

0 8

ABC

Press VOL + or VOL
- to adjust volume.

PHONES
Jack

POWER

VOL + / VOL-

*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.

LSQT0582A_P10-21.p65

12/14/2001, 2:04 PM

Summary of Contents for PVQ-1312W




























































































































































































































































Search results

Summary of Contents for PVQ-1312W

Reviews:

Related manuals for PVQ-1312W

Brands by name

Popular brands

Panasonic PVQ-1312W, Service Manual

Search results

Summary of Contents for PVQ-1312W

Reviews:

Related manuals for PVQ-1312W

Brands by name

Popular brands