26
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
5
Press PROG to set the
program. To Enter More
Programs, press
▲▼
to select
and SET to set a blank program
number, and then repeat step
4.
6
Press PROG twice to exit this mode.
• If you’re using a cable box, make sure that it is tuned to the desired
channel and the power is left on for timer recording.
• PROG TIMER indicator lights up on the unit.
1
Press PROG to display SET
PROGRAM screen.
2
Press
▲▼
to select “TIMER
PROGRAMMING.”
Repeat step 4 to set:
• Start time, stop time
• Channel (or LINE for outside source)
• Speed (SP, SLP)
Set up to 8 Programs
You can set up to 8 programs to be recorded while you are
away.
4
Press
▲▼
to select and SET or
◄►
to set the recording DATE.
• 1~31 = One time
• DAILY (day) = Monday~Friday
• WEEKLY (SU~SA) = Same time once a
week
Example:
Today’s Date
WEEKLY
(SA)
7
WEEKLY
(MO)
8
31
1
6
WEEKLY
(SU)
DAILY
(day)
3
Press SET to display screen.
• If a program is already in memory, press
▲▼
, and SET to select an
unused program number.
Timer Recording
5
Press PROG twice to exit this mode.
To Replace program...
a. Press SET to display.
b. Press
▲▼
to select and press
SET or
◄►
to set new program
contents.
c. Press PROG.
To Clear program...
Press ADD/DLT.
4
Press
▲▼
to select the desired
program.
Notes:
• 2 minutes before Timer recording is performed, “PLEASE PREPARE FOR
TIMER REC” appears and/or the PROG TIMER Indicator flashes. Be sure
a cassette with record tab is loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered program
will have priority.
• If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 25), the Timer Recording will not be
performed.
• If there is a power interruption of more than one minute, the recording may
not be performed or continued.
• If “INCOMPLETE” appears after all items have been set, check all entries
and make necessary corrections.
1
Press PROG to display SET
PROGRAM screen.
2
Press
▲▼
to select “TIMER
PROGRAMMING.”
3
Press SET to display screen.
Review, Replace or
Clear Program Con tents :
(Recording is not in progress)
1
Hold down STOP for a few seconds to cancel the
Timer Recording.
• Any future daily or weekly recordings will be performed as
programmed.
Cancel a Timer Re cord ing:
(Recording is in progress)
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT:
SET:SET
END
:PROG
P DT START
STOP
CH SPD
1
-- --:-- --:--
--
--
2 -- --:-- --:--
--
--
3 -- --:-- --:--
--
--
4 -- --:-- --:--
--
--
SELECT:
SET:SET
END
:PROG
P DT START
STOP
CH SPD
1
10
9:00a12:00p 08
SP
2 -- --:-- --:--
--
--
3 -- --:-- --:--
--
--
4 -- --:-- --:--
--
--
SET COMPLETED
CANCEL:ADD/DLT
SELECT:
SET:SET
END
:PROG
P DT START
STOP
CH SPD
1 10
9:00a12:00p 08
SP
2day 11:00a11:30a125
SP
3 12
8:00p 9:30p L1 SLP
4 -- --:-- --:--
--
--
CANCEL:ADD/DLT
SELECT:
SET:SET
EXIT
:PROG
P DT START
STOP
CH SPD
1
-- --:-- --:--
--
--
2day 11:00a11:30a125
SP
3 12
8:00p 9:30p L1 SLP
4 -- --:-- --:--
--
--
SELECT:
SET:SET
END
:PROG
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT:
SET:SET
END
:PROG
P DT START
STOP
CH SPD
1
10
9:00a12:00p 08
SP
2day 11:00a11:30a125
SP
3 12
8:00p 9:30p L1 SLP
4 -- --:-- --:--
--
--
CANCEL:ADD/DLT
SELECT:
SET:SET
END
:PROG
