Panasonic PV-VS4821-K Operating Instructions Manual Download

Page: 18 / 52

Playback a Tape

PAUSE/
SLOW

REW

STOP

EJECT

Multi Function Display

Insert a tape.

Playback using VCR controls

Press PLAY.

Press STOP/EJECT to stop and/ or
eject tape.

S-VHS

S-VHS ET

PLAY

STOP/EJECT

REC

REW

POWER

VCR/TV

REC

CHANNEL

PLAY

Note

Remove loose or
peeling labels from tapes
to prevent tape jam.

Ready Check List

All connections are made (pg. 10, 12, 28).
TV and VCR are plugged in.
TV is on and tuned to CH3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR.)

Insert a tape.

• VCR power comes on.

“VCR” lights up on Multi Function Display.

Press PLAY*
to play a tape.

• If tape has no rec. tab (pg. 4), auto play begins.

Press STOP
to stop a tape.

• These features work best in SP or SLP mode.

• The sound will be muted.

• To reduce picture noise,

see “Manual Tracking Control” on page 46.

• After the VCR is in Still or Slow mode

for 3 minutes, it will switch to Stop mode
automatically to protect the tape and the video
head.

Notes

Press EJECT on the remote,
or STOP/EJECT on VCR to eject a tape.

Rapid Rewind/FF

Special Features During Play

Forward/ Reverse scene search
--> Press FF or REW.
--> Press again or PLAY to release.

Still (Freeze) picture
--> Press PAUSE/SLOW.
--> Press PLAY to release.

Frame by Frame picture
--> Press PAUSE/SLOW in Still mode.
--> Press PLAY to release.

Slow Motion picture
--> Hold down PAUSE/SLOW in Still mode.
--> Press PLAY to release.

Press REW or FF in Stop mode
to rewind/ fast forward a tape.

• Rewind tapes in approximately one minute

when using a T-120 tape.

Summary of Contents for PV-VS4821-K





















































Search results

Summary of Contents for PV-VS4821-K

Reviews:

Related manuals for PV-VS4821-K

Brands by name

Popular brands

Panasonic PV-VS4821-K, Operating Instructions Manual

Search results

Summary of Contents for PV-VS4821-K

Reviews:

Related manuals for PV-VS4821-K

Brands by name

Popular brands