Edit mode
46
LSQT0973
≥
For more information, refer to the operating
instructions for your TV set and recorder.
≥
When you do not need functional indications or
date and time indications, press the
[EXT DISPLAY] button on the remote control for
no indication. (When you connect the
Camcorder and a recorder with the DV cable,
these indications may not appear.)
ª
When neither image nor sound from
the Camcorder is output to the TV set
≥
Check that the plugs are inserted as far as they
go.
≥
Check the connected terminal.
≥
When no image is presented on the TV even if
set [BASIC] >> [AV JACK] >> [OUT/
Ë
], set to
[OUT]. (
-60-
)
Using the DV cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the Camcorder by using the DV
cable PV-DDC9/PV-DDC9-K (optional)
1
,
high-image-quality dubbing can be done in digital
format.
≥
Set to Tape Playback Mode. (Player/
recorder)
1
Connect the Camcorder and digital video
equipment with the DV cable.
2
Set [ADVANCE] >> [REC STDBY] >> [YES].
(Recorder)
≥
You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
Move the joystick up to select [
¥
/
;
] icon.
Or, while pressing the [
¥
REC] button on the
remote control, press the
[PLAY
1
]
button.
5
Move the joystick up to select the [
¥
/
;
]
icon again or press the [
;
] button on the
remote control to stop recording.
(Recorder)
6
Stop playback. (Player)
ª
To cancel the standby for recording
When the Camcorder is in standby for recording,
move the joystick down and select the [
∫
] icon.
≥
Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥
If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound using [SETUP] >>
[AUDIO OUT] on playback.
≥
Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥
Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥
The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
≥
If a picture containing a copyright protection
signal (copy guard) is recorded by the
Camcorder, the picture is distorted by
mosaic-like patterns at playback.
≥
Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB
cable.
≥
When wide images are input, the display such
as the menu screen or the operation icon is
expanded horizontally.
≥
While pictures are input from the DV terminal,
the operation icon blinks on instead of
appearing from the side of the screen when you
press the center of the joystick.
1
DV
DV
LSQT0973ENG.book 46 ページ ２００６年１月３０日 月曜日 午前１１時４０分
