30
Commercial Skip
DECK fast forwards (skips) over 1, 2, or 3 minutes
of recorded tape as desired.
1
Press CM/ZERO
in Play mode.
PLAY
1st Press
2nd Press
3rd Press
1 min Skip
2 min Skip
3 min Skip
• No indication appears on-screen.
• The skip time can be changed by pressing
CM/ZERO repeatedly as shown by the
figure below.
Index Search
Note
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
1
2
Tape Operation
Search System
For each recording, an invisible index
mark is placed on the tape. A program
index and information are also included
for timer recordings. These marks are
used to access or scan recordings.
Press SEARCH*
to display SEARCH
in Stop or Play
mode, and then
press NUMBER
keys
to select
recording number.
• To calculate number,
see below.
Press FF/SLOW+
or
REW/SLOW-
on the
remote to start
search.
Play begins at
search end.
To search forward
or back 1 index,
press FF/SLOW+
or
REW/SLOW-
on the
remote while the
screen at left is
displayed (10 sec.).
• To cancel,
press
PLAY
or
STOP
.
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: indicates start points of each recording.
6
1
5
7
2
3
4
1
7
5
3
4
6
2
Zero Search
To quickly return to a specified tape location.
Continue to record, playback, etc
.
Press STOP.
• DECK will go into FF or REW mode and
stop at the last point the Counter was set
to 0:00:00.
5
4
3
2
1
Press DISPLAY
during play
to display Counter.
Press COUNTER
RESET
on remote at
desired position to
reset to “0:00:00”.
Press CM/ZERO
in Stop mode to
start
Zero Search.
D4745S-K(E) P26-35 (050120).p65
2005/01/20, 14:02
30
