23
23
Timer Operation
Repeat steps 1 and 2 on page 22.
1
P DT START STOP CH SPD
1 day 9 : 00p 12 : 00a 08 SP
2 8 10 : 00a 12 : 00p 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
CANCEL : ADD / DLT
SELECT : SET :
END : PROG
8 SAT 9:00P 12: 00A 08
TODAY
----------------------------------------------
DATE START STOP CH
SP
SELECT : SET :
END : PROG
Press PROG twice to exit this mode.
2
3
To Replace program...
To Clear program...
4
Press
to select the
desired program.
1) Press to display.
2) Press
to select and
press
or to set new
program contents.
3) Press PROG.
Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few
seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings
will be performed as programmed.
Press ADD/DLT.
Review, Replace or Clear Program
Contents :
(Recording is not in progress)
• 2 minutes before Timer recording is performed, “PLEASE
PREPARE FOR TIMER REC” appears and/or the PROG
TIMER Indicator fl ashes. Be sure a cassette with record tab is
loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered
program will have priority.
• If the start time for a Timer Recording comes up during a
normal recording or One Touch Recording (page 12), the Timer
Recording will not be performed.
• If there is a power interruption of more than one minute, the
recording may not be performed or continued.
• If “INCOMPLETE” appears after all items have been set, check
all entries and make necessary corrections.
Notes
P DT START STOP CH SPD
1 -- -- : -- -- : -- -- --
2 8 10 : 00p 12 : 00a 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
CANCEL : ADD / DLT
SELECT : SET :
END : PROG
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
ADD/DLT
PROG
STOP
