Panasonic PT47WXD63G - 47" PROJECTION TV, Service Manual

Page: 61 / 197

“JPEG Program Download” menu.
NOTE:
To abort the download process just press “EXIT” on remote in the
“JPEG Program Download” menu.
IMPORTANT:
For better results in this procedure, be sure that the set is already
powered ON and if the set is powered OFF, wait at least 10 seconds
after turning ON the receiver before inserting the SD service card
to the JPEG viewer slot.
2. Select the newest version of software with CH keys, then press OK.
3. A confirmation sign appears asking if the selected version wants to
be downloaded, then with VOL keys select “YES” and press OK to
start downloading.
IMPORTANT!:
ONCE THAT DOWNLOADING PROCESS HAS BEGUN IT CANNOT
BE CANCELLED. DURING SOFTWARE DOWNLOADING DO NOT
DISCONNECT THE AC PLUG FROM OUTLET!!, THIS COULD RESULT
IN A PERMANENT DAMAGE TO THE SERVICE CARD AND TO THE
RECEIVER AS WELL.
4. Once the downloading is finished, disconnect the AC plug from
outlet then remove the SD service card from the slot.
5. Connect again the AC plug to the outlet and turn power ON.
6. Press both OK and POWER buttons on the receiver’s front panel to
acces to the self-check screen and wait a few seconds.
7. If the JPEG module is working accordingly, a “JPEG OK” sign will
appear and within, the last upgrade version of the JPEG viewer
software, i. e. “JPEG OK : 01.00.04” .
8. Press any key to exit the self-check screen or unplug AC cord to
completely reset.
17.18. JPEG Factory and Service Mode (JPEG)
1. Enter service mode, and with the SD service card already inserted
(JPEG viewer slot), from the service menu select “JPEG” DAC
register.
2. A screen displaying the “JPEG Factory and Service Mode” menu
will appear with 6 options and at the bottom the current JPEG
61