Panasonic PT-VX425N, Operating Instructions Manual, Page: 92 / 151

r
Default setting of [USER1], [USER2], [USER3]
f
The following settings are set before the projector leaves the factory.
[SSID] Panasonic Projector
[DHCP] OFF
[IP ADDRESS] 192.168.11.100
[SUBNET MASK] 255.255.255.0
[DEFAULT GATEWAY]
192.168.11.1
[AUTHENTICATION]
OPEN
[ENCRYPTION] NONE
[DNS1]/[DNS2] NONE
[CONNECTION LOCK]
You can switch the input signal between Panasonic APPLICATION, MIRRORING and MEMORY VIEWER, or choose one fixed
input signal from three of them.
1) Press
as
to select [CONNECTION LOCK].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
The [NETWORK/USB] input signal can be switched between [Panasonic APPLICATION],
[MIRRORING] and [MEMORY VIEWER].
[Panasonic APPLICATION]
The [Panasonic APPLICATION] is the fixed [NETWORK/USB] input signal.
[MIRRORING] The [MIRRORING] is the fixed [NETWORK/USB] input signal.
[MEMORY VIEWER]
The [MEMORY VIEWER] is the fixed [NETWORK/USB] input signal.
Note
f
If [CONNECTION LOCK] is set to one fixed item other than [OFF] and you press other buttons, the [KEY NOT APPLICABLE]
appears.
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1) Press
as
to select [NAME CHANGE].
2) Press the <ENTER> button.
f
The [NAME CHANGE] screen is displayed.
3) Select characters with the
asqw
buttons and press the <ENTER> button to enter the projector
name.
f
Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to
delete a character on the cursor in the entry field.
4) Select [OK] with the
as
buttons and press the <ENTER> button.
f
To cancel the change of the name, select [CANCEL] and press the <ENTER> button.
Note
f
[Name
□□□□
] (
□□□□
is 4-digit number) is set before the projector leaves the factory.
[PASSWORD]
By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and
interrupting projection images, etc.
1) Press
as
to select [PASSWORD].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Disables the entry of network password.
[ON]
Enables the entry of network password.
Note
f
Set to [ON] to perform password check when connecting with the projector using “Wireless Manager ME6.3”.
(Default: [OFF])
f
When using the deliver image to all function or the delivered image deletion function of the “Multi Projector Monitoring &
Control Software”, image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery
functions, set it to [OFF].
92 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu