Replacement
ENGLISH -
63
Maintenance
cover (side); pull out the handle and take out
the side filter.
Replace the air filter units.
2 )
Put new filters back into the position. Make sure
z
that the filters are fully inserted to the projector.
Resetting the Filter Counter
J
Be sure to reset the Filter counter after replacing the
filter.(
Æ
page 59 "
Filter counter reset
")
Attention
Turn off the power before you replace the air filter
z
unit.
When attaching the air filter unit, make sure that
z
the projector is stable, and work in an environment
that is safe, even in the event of the air filter unit
dropping.
Do not operate the projector with the filters
z
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put anything into the air vents. Doing so
z
may result in malfunction of the projector.
Do not wash the filters with water or any other liquid
z
matter. Otherwise the filters may be damaged.
Attaching the Filter Cover to the Projector
J
The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the
projector on
the ceiling.
Turn over the projector.
1 )
Remove the filter cover (bottom).
2 )
(
Æ
page 62)
Attaching the filter cover to the projector.
3 )
Push the cover as the picture shown.
z
Attach the projector to the ceiling mount
4 )
in accordance with the instruction
manuals which come with the ceiling
mount.
Attention
Please keep the filter cover (bottom) for later use.
z
If the Projector Mount Base ET-PKV100B is applied, the supplied filter cover is unnecessary.
z
J
Lamp unit
The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the
Information menu on page 60.
It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer.
Consult your dealer to purchase a replacement lamp unit (ET-LAV100, dealt as a service component).
To Ceiling Mount
Filter Cover
(supplied)
Projector
