Specifications
Main unit
Power supply
Power consumption
LCD panel
Panel size
Display method
Pixels
Pixel configuration
Lens
Lamp
Screen size
Colors
Brightness*
2
Center-to-corner uniformity*
2
Contrast*
2
Resolution
Optical axis shift
Keystone correction range
Installation
Built-in speaker
Output power
Terminals
HDMI IN
COMPUTER (RGB) 1 IN
R, G, B
Y, P
B
(C
B
), P
R
(C
R
)
AC100–240V 3.5A 50/60 Hz
300W
6W when Standby mode set to Normal,
0.5W when Standby mode set to Eco*
1
15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)
Throw ratio
0.46:1
Transparent LCD panel (× 3, R/G/B)
Drive method
Active matrix method
1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels
Stripe
Fixed zoom, manual focus F1.8 f 6.08mm
230 W UHM lamp
50 – 100 inches (1.27 – 2.54 m) diagonally, 16:10 aspect ratio
Full color (16,777,216 colors)
3,200 lumens (
LAMP POWER
:
NORMAL
)
80%
10,000:1 (full on/full off, Iris ON)
1,280 × 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 × 800 pixels.)
7.25:1 (fixed)
Vertical: ±15°, horizontal: ±15°
Ceiling/floor, front/rear (menu selection)
10 W (monaural)
HDMI 19-pin × 1, HDCP and Deep color compatible
VGA (640 × 480) – WUXGA*
4
(1,920 × 1,200),
Audio signal: linear PCM
(sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
D-sub HD 15-pin (female) × 1
R, G, B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative automatic)
Y: 1.0 Vp-p (including sync signal), 75 ohms
S-VIDEO
Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
P
B
(C
B
), P
R
(C
R
): 0.7 Vp-p, 75 ohms
480i (525i)*
3
, 576i (625i)*
3
, 480p (525p), 576p (625p), 720 (750)/60p,
720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p,
1080 (1125)/24p, 1080 (1125)/24sF, 1080 (1125)/30p, 1080 (1125)/60p,
1080 (1125)/50p,
NOTE: D-Sub -S video conversion cable (ET-ADSV) is required.
VIDEO IN
AUDIO IN 1
AUDIO IN 2
AUDIO OUT
SERIAL IN
LAN
Pin jack × 1, 1.0 Vp-p, 75 ohms
M3 (L, R) × 1, 0.5 Vrms
Pin jack × 2 (L, R x 1), 0.5 Vrms
M3 (L, R) × 1 (monitor out: 0 – 2.0 Vrms, variable)
D-sub 9-pin (female) × 1, for external control (RS-232C compliant)
USB
USB A (type A) connector × 1, for Memory Viewer (Out put 5V MAX 500mA)
USB B (type B) connector × 1, for USB Display
RJ-45 × 1, for network connection, compliant with PJLink™,
100Base-TX/10Base-T
COMPUTER (RGB) 2 IN / 1 OUT
R, G, B
D-sub HD 15-pin (female) × 1
R, G, B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: TTL (positive/negative automatic)
NOTE: Input/output is selected using the menu. When output is selected, signals from
COMPUTER (RGB) 1 IN are output.
PT-
TW340
LCD Projectors
As of December 2015
2 / 8
SFL14M010-1
