-35-
To enter the service mode
To enter the “Service mode”, press and hold the
MENU
button
and
ENTER button
on the projector for more than
3 seconds or press and hold the
MENU button
on the remote control for more than 20 seconds. The service menu
appears on the screen as follows.
To adjust service data
Select the adjustment group no. by pressing the
MENU
button
(increase) or
ENTER
button
(decrease), and se-
lect the adjustment item no. by pressing the pointer
e
or
d
button
, and change the data value by pressing the
7
or
8
button
. Refer to the “Service adjustment data table” for further description of adjustment group no., item no. and
data value.
To exit the service mode
To exit the service mode, press the
button
.
Service adjustment menu operation
Electrical Adjustments
Service Mode
Input
Computer 1
Group
No.
Data
0
0
+0
Ver. 1.00
Firmware version
Group no.
Item no.
Data value
Input mode
