manualshive.com logo in svg

Panasonic PT-TW230E, Operating Instructions Manual

Share
Download
Panasonic PT-TW230E Operating Instructions Manual Download Page 58

58

 - ENGLISH

Maintenance

Replacement

Before replacing the unit

When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect 

 

z

the power plug from the wall outlet. (

Æ

pages 23, 27)

Be sure to observe the procedure “Turing Off the projector” (

 

z

Æ

page 27) when performing power supply 

operation.

Maintenance

Outer Case

 

J

Wipe off dirt and dust using a soft dry cloth.

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector 

 

z

with a dry cloth.

Do not use benzene, thinner, or rubbing alcohol, other solvents, household cleaners, or chemical treated 

 

z

dusters. Using them may cause deterioration of the outer case.

Front glass surface of the lens

 

J

Wipe off the dirt and dust off the front surface of the lens with soft clean cloth.

Do not use a cloth that has an abrasive surface or a cloth that is moist, oily, or covered with dust.

 

z

Do not use excessive force when wiping the lens as it is fragile.

 

z

Attention

The lens is made of glass. Impacts or excessive force when wiping may scratch its surface.

 

 

z

Please handle with care.

Summary of Contents for PT-TW230E














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands