Panasonic PT-TW230E Page 28 Operating Instructions Manual Download

Page: 28 / 77

- ENGLISH

Basic Operation

Check the connections of the peripheral devices and connection of the power cord (

page 23) and switch on the

power (

page 25) to start the projector. Select the image and adjust the state of the image.

Selecting the image

Select an input signal.

The image selected with the <COMPUTER 1>,

<COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>,

or <COMPONENT> button is projected (

page 29).

Attention

Images may not be projected properly depending on the

connected device and DVD, video tape, etc. to be played.

Select a system format that is suitable for the input signal

in [Component] or [RGB] in the [Input] menu (

page 35).

Check the aspect ratio of the screen and the image and

select the optimum aspect ratio under the [Screen] menu

(

page 44).

How to adjust the state of the

image

Adjust the projection angle.

1 )

For details, see “Adjusting front adjustable feet”.

(

page 21)

Adjust the focus.

2 )

Turn [Focus lever] to adjust the image.

Note

It is recommended that the images are projected

continuously for at least 30 minutes before the focus is

adjusted.

If keystone distortion occurs, see “KEYSTONE”

(

page 45).

Focus Lever

Projecting

Summary of Contents for PT-TW230E














































































Search results

Summary of Contents for PT-TW230E

Reviews:

Related manuals for PT-TW230E

Brands by name

Popular brands

Panasonic PT-TW230E, Operating Instructions Manual

Search results

Summary of Contents for PT-TW230E

Reviews:

Related manuals for PT-TW230E

Brands by name

Popular brands