Chapter 1
Preparation — About your projector
28 - ENGLISH
About your projector
Remote control
1
3
2
4
5
7
6
8
9
10
15
12
11
13
14
16
17
Front
Top
Bottom
1 Power standby <
v
> button
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
2 Power on <
b
> button
Sets the projector to projection mode when the <MAIN
POWER> switch on the projector is set to <ON> and the power
is turned off (standby mode).
3 Remote control indicator
Blinks if any button in the remote control is pressed.
4
Lens buttons (<FOCUS>, <ZOOM>, <SHIFT>)
Adjusts the focus, zoom, and lens shift. (
x
page 68)
5 <MENU> button/<ENTER> button/
asqw
buttons
Used to navigate through the menu screen. (
x
page 76)
asqw
buttons are also used to enter the password in
[SECURITY] or enter characters.
6 <ON SCREEN> button
Switches the on-screen display function on (display) or off
(hide). (
x
page 72)
7
Input selection buttons (<RGB1/2>, <DIGITAL LINK>,
<DVI-D>, <VIDEO>, <SDI>, <HDMI>)
Switches the input signal to project. (
x
page 67)
8 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
(
x
page 73)
9 Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple
projector environment.
10 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed while in automatic adjustment.
(
x
page 73)
11 <SHUTTER> button
Used to temporarily turn off the image. (
x
page 72)
12 <TEST PATTERN> button
Displays the test pattern. (
x
page 73)
13 <STATUS> button
Displays the projector information.
14 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(
x
page 77)
15 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. (
x
page 33)
16 Remote control signal transmitter
17 Remote control wired terminal
This is a terminal used to connect to the projector via a cable
when the remote control is used as a wired remote control.
(
x
page 33)
Attention
f
Do not drop the remote control.
f
Avoid contact with liquids or moisture.
f
Do not attempt to modify or disassemble the remote control.
f
Observe the following instructions that are indicated on the caution label at the back of the remote control:
g
Do not use old battery with new one.
g
Do not use batteries other than the type specified.
