Chapter 4 Settings — [PICTURE] menu
ENGLISH - 49
Note
f
When [PICTURE MODE] (
x
page 47) is set to [DYNAMIC], [COLOR TEMPERATURE] is fixed to [USER]. (However, [WHITE BALANCE
HIGH] cannot be adjusted.)
f
When [COLOR MATCHING] (
x
page 60) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER].
Adjusting desired white balance
1)
Press
as
to select [COLOR TEMPERATURE].
2)
Press
qw
or the <ENTER> button.
f
The
[COLOR TEMPERATURE]
individual adjustment screen is displayed.
3)
Press
qw
to select [USER].
4)
Press the <ENTER> button.
f
The
[COLOR TEMPERATURE]
screen is displayed.
5)
Press
as
to select [WHITE BALANCE].
6)
Press the <ENTER> button.
f
The
[WHITE BALANCE]
screen is displayed.
7)
Press
as
to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
8)
Press the <ENTER> button.
f
The
[WHITE BALANCE HIGH]
screen or the
[WHITE BALANCE LOW]
screen is displayed.
9)
Press
as
to select [RED], [GREEN], or [BLUE].
10)
Press
qw
to adjust the level.
Item
Operation
Adjustment
Range
[RED]
Press the
w
button.
Deepens red.
[WHITE BALANCE HIGH]: 0 - 255 (factory default is 255)
[WHITE BALANCE LOW]: -127 - 127 (factory default is 0)
Press the
q
button.
Weakens red.
[GREEN]
Press the
w
button.
Deepens green.
Press the
q
button.
Weakens green.
[BLUE]
Press the
w
button.
Deepens blue.
Press the
q
button.
Weakens blue.
Note
f
Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
f
The setting of [COLOR TEMPERATURE] is not reflected in internal test patterns (
x
page 83). Make sure to set [COLOR TEMPERATURE]
while projecting input signal.
Changing the [USER] name
1)
Press
as
to select [COLOR TEMPERATURE].
2)
Press
qw
or the <ENTER> button.
f
The
[COLOR TEMPERATURE]
individual adjustment screen is displayed.
3)
Press
qw
to select [USER].
4)
Press the <ENTER> button.
f
The
[COLOR TEMPERATURE]
screen is displayed.
5)
Press
as
to select [COLOR TEMPERATURE NAME CHANGE].
6)
Press the <ENTER> button.
f
The
[COLOR TEMPERATURE NAME CHANGE]
screen is displayed.
7)
Press
asqw
to select the text, and press the <ENTER> button to enter the text.
