Chapter 4 Settings — [PICTURE] menu
ENGLISH - 45
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select the item from the
sub-menu.
Refer to “Navigating through the menu” (
x
page 40) for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1)
Press
as
to select [PICTURE MODE].
2)
Press
qw
to switch [PICTURE MODE].
f
The items will switch each time you press the button.
[GRAPHIC]
The image becomes suitable for input from to the personal computer.
[STANDARD]
The image becomes suitable for moving images in general.
[CINEMA]
The image becomes suitable for movie sources.
[NATURAL]
The image is sRGB compliant.
[REC709]
*1
The image is REC709 compliant.
[DICOM SIM.]
*1
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
[DYNAMIC]
The light output is maximized for use in bright areas.
*1 Use the factory default for the settings other than [PICTURE MODE].
Note
f
The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie based input signals.
f
DICOM is an abbreviation of “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of displayed images.
[CONTRAST]
You can adjust the contrast of the colors.
1)
Press
as
to select [CONTRAST].
2)
Press
qw
or the <ENTER> button.
f
The
[CONTRAST]
individual adjustment screen is displayed.
3)
Press
qw
to adjust the level.
Operation
Adjustment
Range
Press the
w
button.
Brightens the screen and makes the color deeper.
-31 - 31
Press the
q
button.
Darkens the screen and makes the color lighter.
Attention
f
Adjust [BRIGHTNESS] first when you need to adjust the black level.
