Chapter 4
Settings — [ADVANCED MENU] menu
102 - ENGLISH
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Standard setting.
[FAST]
*1
Simplifies the image processing to reduce image frame delay.
[FIXED]
*2
Sets image frame delay to be constant regardless of the image position or magnification.
*1
When input signals are other than interlaced signals, [FAST] cannot be set.
*2 Only when moving image signals and still image signals with the vertical scanning frequency of 50 Hz or 60 Hz are input
Note
f
[DIGITAL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST].
f
[FRAME RESPONSE] cannot be set during P IN P.
[FRAME CREATION]
Set the amount of image frame interpolation.
The image with fast movement can be displayed more smoothly by automatically generating the intermediate
frame from the previous and next frame.
1) Press
as
to select [FRAME CREATION].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the frame creation function.
[1]
Sets the amount of interpolation weaker.
[2]
Sets the amount of interpolation midway. (Factory default)
[3]
Sets the amount of interpolation stronger.
Note
f
The effect may be difficult to notice depending on the image.
f
Switch the setting when the image looks unnatural due to delay of image or generation of noise.
f
[FRAME CREATION] is disabled and cannot be selected when [FRAME RESPONSE] is set to [FAST].
f
[FRAME CREATION] is disabled and cannot be selected when the [3D SETTINGS] menu
→
[3D SYSTEM SETTING] (
x
page 105) is set
to [DUAL (LEFT)] or [DUAL (RIGHT)].
f
[FRAME CREATION] is disabled and cannot be selected when the [3D SETTINGS] menu
→
[3D INPUT FORMAT] (
x
page 106) is set to
[AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL]. In [AUTO], however, this
only occurs when 3D format can be recognized.
f
The [FRAME CREATION] setting will be disabled and cannot be selected when the [DISPLAY OPTION] menu
→
[SIMUL INPUT SETTING]
(
x
page 114) is set to [AUTO(3D)] or [AUTO(2D)] and the image in simultaneous format is displayed.
f
This function is disabled when the internal test pattern or [3D TEST PATTERN] is displayed.
[FRAME LOCK]
Set this function to display the image in 3D when the vertical scanning frequency of the signal is 25 Hz, 50 Hz,
and 100 Hz.
1) Press
as
to select [FRAME LOCK].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Decreases the flickering of the displayed image.
[ON]
Synchronizes the displayed image to the vertical scanning frequency of the input signal.
Note
f
[FRAME LOCK] is not displayed when a signal with the vertical scanning frequency other than the above is input or 2D images are
displayed.
f
The image may flicker when [FRAME LOCK] is set to [ON].
f
The displayed image may look discontinuous when [FRAME LOCK] is set to [OFF].
