Panasonic PT-RQ32KU, Operating Instructions Manual

Page: 119 / 285

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 119
3) Press
as
to select [DUAL LINK SETTING] or [QUAD LINK SETTING], and press the <ENTER> button.
f
The [DUAL LINK SETTING] screen or the [QUAD LINK SETTING] screen is displayed.
f
When [DUAL LINK SETTING] is selected, press
as
to select [SDI1-2] or [SDI3-4], and press the
<ENTER> button.
4) Press
as
to select [4K DIVISION].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically select [SQUARE] or [INTERLEAVE].
[SQUARE] Fixes the transmission method to Square Division.
[INTERLEAVE]
Fixes the transmission method to 2-Sample Interleave Division.
Setting [3G-SDI MAPPING] in [SDI IN]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The
[SDI IN]
screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f
The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
f
When [QUAD LINK SETTING] is selected, proceed to Step
5)
.
4) Press
as
to select [SDI1], [SDI2], [SDI3], [SDI4], [SDI1-2], or [SDI3-4], and press the <ENTER> button.
f
The [SINGLE LINK SETTING] screen or [DUAL LINK SETTING] screen for the selected item is displayed.
5) Press
as
to select [3G-SDI MAPPING].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically select [LEVEL A] or [LEVEL B].
[LEVEL A] Fixes the mapping method to 3G-SDI Level-A.
[LEVEL B]
Fixes the mapping method to 3G-SDI Level-B.
Note
f
This function does not operate when the SD-SDI signal or the HD-SDI signal is input.
f
[3G-SDI MAPPING] cannot be set when [SDI LINK] is set to [AUTO].
Setting [SYSTEM SELECTOR] in [SDI IN]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The [SDI IN] screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f
The
[SINGLE LINK SETTING]
screen, the
[DUAL LINK SETTING]
screen, or the
[QUAD LINK SETTING]
screen is displayed.
f
When [QUAD LINK SETTING] is selected, proceed to Step 5) .
4) Press
as
to select [SDI1], [SDI2], [SDI3], [SDI4], [SDI1-2], or [SDI3-4], and press the <ENTER> button.
f
The
[SINGLE LINK SETTING]
screen or
[DUAL LINK SETTING]
screen for the selected item is displayed.
5) Press
as
to select [SYSTEM SELECTOR].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.